Elep

#!/bin/sh
# git-mergetool--lib is a library for common merge tool functions

: ${MERGE_TOOLS_DIR=$(git --exec-path)/mergetools}

mode_ok () {
	if diff_mode
	then
		can_diff
	elif merge_mode
	then
		can_merge
	else
		false
	fi
}

is_available () {
	merge_tool_path=$(translate_merge_tool_path "$1") &&
	type "$merge_tool_path" >/dev/null 2>&1
}

list_config_tools () {
	section=$1
	line_prefix=${2:-}

git config --get-regexp $section'\..*\.cmd' |
	while read -r key value
	do
		toolname=${key#$section.}
		toolname=${toolname%.cmd}

printf "%s%s\n" "$line_prefix" "$toolname"
	done
}

show_tool_names () {
	condition=${1:-true} per_line_prefix=${2:-} preamble=${3:-}
	not_found_msg=${4:-}
	extra_content=${5:-}

shown_any=
	( cd "$MERGE_TOOLS_DIR" && ls ) | {
		while read toolname
		do
			if setup_tool "$toolname" 2>/dev/null &&
				(eval "$condition" "$toolname")
			then
				if test -n "$preamble"
				then
					printf "%s\n" "$preamble"
					preamble=
				fi
				shown_any=yes
				printf "%s%s\n" "$per_line_prefix" "$toolname"
			fi
		done

if test -n "$extra_content"
		then
			if test -n "$preamble"
			then
				# Note: no '\n' here since we don't want a
				# blank line if there is no initial content.
				printf "%s" "$preamble"
				preamble=
			fi
			shown_any=yes
			printf "\n%s\n" "$extra_content"
		fi

if test -n "$preamble" && test -n "$not_found_msg"
		then
			printf "%s\n" "$not_found_msg"
		fi

test -n "$shown_any"
	}
}

diff_mode() {
	test "$TOOL_MODE" = diff
}

merge_mode() {
	test "$TOOL_MODE" = merge
}

translate_merge_tool_path () {
	echo "$1"
}

check_unchanged () {
	if test "$MERGED" -nt "$BACKUP"
	then
		status=0
	else
		while true
		do
			echo "$MERGED seems unchanged."
			printf "Was the merge successful? [y/n] "
			read answer || return 1
			case "$answer" in
			y*|Y*) status=0; break ;;
			n*|N*) status=1; break ;;
			esac
		done
	fi
}

valid_tool () {
	setup_tool "$1" && return 0
	cmd=$(get_merge_tool_cmd "$1")
	test -n "$cmd"
}

setup_tool () {
	tool="$1"

# Fallback definitions, to be overriden by tools.
	can_merge () {
		return 0
	}

can_diff () {
		return 0
	}

diff_cmd () {
		status=1
		return $status
	}

merge_cmd () {
		status=1
		return $status
	}

translate_merge_tool_path () {
		echo "$1"
	}

if ! test -f "$MERGE_TOOLS_DIR/$tool"
	then
		# Use a special return code for this case since we want to
		# source "defaults" even when an explicit tool path is
		# configured since the user can use that to override the
		# default path in the scriptlet.
		return 2
	fi

# Load the redefined functions
	. "$MERGE_TOOLS_DIR/$tool"

if merge_mode && ! can_merge
	then
		echo "error: '$tool' can not be used to resolve merges" >&2
		return 1
	elif diff_mode && ! can_diff
	then
		echo "error: '$tool' can only be used to resolve merges" >&2
		return 1
	fi
	return 0
}

get_merge_tool_cmd () {
	merge_tool="$1"
	if diff_mode
	then
		git config "difftool.$merge_tool.cmd" ||
		git config "mergetool.$merge_tool.cmd"
	else
		git config "mergetool.$merge_tool.cmd"
	fi
}

# Entry point for running tools
run_merge_tool () {
	# If GIT_PREFIX is empty then we cannot use it in tools
	# that expect to be able to chdir() to its value.
	GIT_PREFIX=${GIT_PREFIX:-.}
	export GIT_PREFIX

merge_tool_path=$(get_merge_tool_path "$1") || exit
	base_present="$2"
	status=0

# Bring tool-specific functions into scope
	setup_tool "$1"
	exitcode=$?
	case $exitcode in
	0)
		:
		;;
	2)
		# The configured tool is not a built-in tool.
		test -n "$merge_tool_path" || return 1
		;;
	*)
		return $exitcode
		;;
	esac

if merge_mode
	then
		run_merge_cmd "$1"
	else
		run_diff_cmd "$1"
	fi
	return $status
}

# Run a either a configured or built-in diff tool
run_diff_cmd () {
	merge_tool_cmd=$(get_merge_tool_cmd "$1")
	if test -n "$merge_tool_cmd"
	then
		( eval $merge_tool_cmd )
		status=$?
		return $status
	else
		diff_cmd "$1"
	fi
}

# Run a either a configured or built-in merge tool
run_merge_cmd () {
	merge_tool_cmd=$(get_merge_tool_cmd "$1")
	if test -n "$merge_tool_cmd"
	then
		trust_exit_code=$(git config --bool \
			"mergetool.$1.trustExitCode" || echo false)
		if test "$trust_exit_code" = "false"
		then
			touch "$BACKUP"
			( eval $merge_tool_cmd )
			status=$?
			check_unchanged
		else
			( eval $merge_tool_cmd )
			status=$?
		fi
		return $status
	else
		merge_cmd "$1"
	fi
}

list_merge_tool_candidates () {
	if merge_mode
	then
		tools="tortoisemerge"
	else
		tools="kompare"
	fi
	if test -n "$DISPLAY"
	then
		if test -n "$GNOME_DESKTOP_SESSION_ID"
		then
			tools="meld opendiff kdiff3 tkdiff xxdiff $tools"
		else
			tools="opendiff kdiff3 tkdiff xxdiff meld $tools"
		fi
		tools="$tools gvimdiff diffuse ecmerge p4merge araxis bc3 codecompare"
	fi
	case "${VISUAL:-$EDITOR}" in
	*vim*)
		tools="$tools vimdiff emerge"
		;;
	*)
		tools="$tools emerge vimdiff"
		;;
	esac
}

show_tool_help () {
	tool_opt="'git ${TOOL_MODE}tool --tool-<tool>'"

tab='	'
	LF='
'
	any_shown=no

cmd_name=${TOOL_MODE}tool
	config_tools=$({
		diff_mode && list_config_tools difftool "$tab$tab"
		list_config_tools mergetool "$tab$tab"
	} | sort)
	extra_content=
	if test -n "$config_tools"
	then
		extra_content="${tab}user-defined:${LF}$config_tools"
	fi

show_tool_names 'mode_ok && is_available' "$tab$tab" \
		"$tool_opt may be set to one of the following:" \
		"No suitable tool for 'git $cmd_name --tool=<tool>' found." \
		"$extra_content" &&
		any_shown=yes

show_tool_names 'mode_ok && ! is_available' "$tab$tab" \
		"${LF}The following tools are valid, but not currently available:" &&
		any_shown=yes

if test "$any_shown" = yes
	then
		echo
		echo "Some of the tools listed above only work in a windowed"
		echo "environment. If run in a terminal-only session, they will fail."
	fi
	exit 0
}

guess_merge_tool () {
	list_merge_tool_candidates
	cat >&2 <<-EOF

This message is displayed because '$TOOL_MODE.tool' is not configured.
	See 'git ${TOOL_MODE}tool --tool-help' or 'git help config' for more details.
	'git ${TOOL_MODE}tool' will now attempt to use one of the following tools:
	$tools
	EOF

# Loop over each candidate and stop when a valid merge tool is found.
	for tool in $tools
	do
		is_available "$tool" && echo "$tool" && return 0
	done

echo >&2 "No known ${TOOL_MODE} tool is available."
	return 1
}

get_configured_merge_tool () {
	# Diff mode first tries diff.tool and falls back to merge.tool.
	# Merge mode only checks merge.tool
	if diff_mode
	then
		merge_tool=$(git config diff.tool || git config merge.tool)
	else
		merge_tool=$(git config merge.tool)
	fi
	if test -n "$merge_tool" && ! valid_tool "$merge_tool"
	then
		echo >&2 "git config option $TOOL_MODE.tool set to unknown tool: $merge_tool"
		echo >&2 "Resetting to default..."
		return 1
	fi
	echo "$merge_tool"
}

get_merge_tool_path () {
	# A merge tool has been set, so verify that it's valid.
	merge_tool="$1"
	if ! valid_tool "$merge_tool"
	then
		echo >&2 "Unknown merge tool $merge_tool"
		exit 1
	fi
	if diff_mode
	then
		merge_tool_path=$(git config difftool."$merge_tool".path ||
				  git config mergetool."$merge_tool".path)
	else
		merge_tool_path=$(git config mergetool."$merge_tool".path)
	fi
	if test -z "$merge_tool_path"
	then
		merge_tool_path=$(translate_merge_tool_path "$merge_tool")
	fi
	if test -z "$(get_merge_tool_cmd "$merge_tool")" &&
		! type "$merge_tool_path" >/dev/null 2>&1
	then
		echo >&2 "The $TOOL_MODE tool $merge_tool is not available as"\
			 "'$merge_tool_path'"
		exit 1
	fi
	echo "$merge_tool_path"
}

get_merge_tool () {
	# Check if a merge tool has been configured
	merge_tool=$(get_configured_merge_tool)
	# Try to guess an appropriate merge tool if no tool has been set.
	if test -z "$merge_tool"
	then
		merge_tool=$(guess_merge_tool) || exit
	fi
	echo "$merge_tool"
}